Every HVAC system comes with its own furnace reset button. It’s usually a red or yellow button located inside the blower compartment. This feature’s primary function is to maintain the safety of your home, and it does that by shutting off your unit once it detects any problems.
Resetting a Gas Furnace
If your furnace’s reset button was tripped, it’s easy enough to turn it back on. If you have a gas furnace, you first need to make sure the pilot light is out and then turn the thermostat temperature to its lowest setting. Once that’s done, turn off the breaker in the circuit box, followed by the main gas supply, while keeping the pilot one on. Relight the pilot light by lighting a match and then turn the circuit breaker and the main gas supply back on. Finally, press and hold the reset button for 30 seconds and raise the temperature of the thermostat once again.
For an electric furnace, all you have to do is turn off the breaker for the furnace’s power supply in the circuit box and locate the reset button. If the button is popped up, press it down. Return the cover to the blower compartment and then turn the power back on.
If your furnace’s reset button keeps tripping, that’s a good sign that your unit might need a repair. Some of the things that cause your rest button to trip include the following:
1. Loss of Fuel
If your furnace is powered by gas or oil, the loss of fuel could trigger the reset button. It’s a quick way to ensure that your HVAC system will not be affected or damaged by the loss of fuel, and it’s fairly simple to fix this.
When you call your contractor for a refill, make sure to mention that the tank is empty so that they can properly prime it.
2. Blocked Gas Valves
Blocked or closed gas valves could be another reason for your reset button constantly being triggered. To confirm this, simply check your unit’s valves and see if everything is in its proper position.
An overheating furnace could potentially be a big problem, but the reset button is there to keep that from happening. Therefore, it’s good to check if your unit has an overheating problem. There needs to be proper airflow where your unit is installed; otherwise, your reset button is just going to keep tripping constantly. You can fix this problem by hiring a cleaning service or replacing your air filters and keeping the air vents open.
4. Dirty Flame Sensor
Your flame sensor can become dirty over time, which can cause your reset button to trip. Some dirt and debris may cover it, making its job much more difficult. It could also cause your furnace to shut off for precautionary reasons. If you get it cleaned regularly, however, it won’t be too much of a problem.
5. Dirty Furnace Filter
A dirty furnace filter might require furnace cleaning in Edmonton. Professionals recommend cleaning your filter at least once every quarter of the year in order to prevent significant damage to your unit.
If you are looking for furnace repair in Edmonton, Legacy Heating and Cooling can help. Legacy has many decades of experience with repairing and servicing furnaces.
You may need your furnace repaired if your air filters are dirty, your pilot light is malfunctioning, your thermostat is faulty, or your furnace is simply old. Legacy can also help with replacing, cleaning, and tuning up your furnace.
Legacy Heating and Cooling is here to help with furnace replacement in Edmonton and Calgary. Legacy guarantees your 100 percent satisfaction. If you are not satisfied with your new furnace, Legacy will refund your money.
Annual maintenance is recommended, but the first year of maintenance is included when your new furnace in Edmonton or Calgary is installed. Legacy offers the best types of new furnaces, like Trane, Lennox, Coleman and Goodman furnaces in Edmonton and Calgary.
Cleaning Your Furnace
Dirt is one of the worst things for your furnace. It not only wastes fuel but it also significantly lowers the efficiency of your furnace. Ensuring that your furnace gets clean is one of the most important parts of furnace maintenance.
Three parts of the furnace need to be cleaned: the filter system, the motor, and the blower. Be sure to replace or clean the filter at the beginning of the heating season and check it monthly during periods of heavy use. If you need your furnace to be cleaned, Legacy can help with furnace cleaning in Edmonton today.
Cost of a Furnace
Heating in Edmonton and Calgary can be costly, but with the most efficient furnace, you will have a furnace that runs accordingly and will not stoke up your heating bill. A new Edmonton or Calgary furnace installation through Legacy typically ranges in price depending on the size of your home.
A new furnace for a small, one-story house of less than 1600 square feet costs around a minimum of $6,500. If you have a medium-sized, one- to three-story home of about 3200 square feet, a new furnace will cost a minimum of about $7,200. If you have a large home with multiple stories, you are looking at a starting cost of around $7,500. Contact Legacy Heating and Cooling at your earliest convenience to get a quote on the cost of a new furnace.
What Legacy Offers
Legacy Heating and Cooling offers cost-effective and comprehension HVAC products in Edmonton, Calgary and surrounding areas. Legacy has years of experience and takes pride in putting customers and quality first.
Legacy installs, maintains, and repairs furnaces, hot water heaters, air conditioning, garage heaters, thermostats, humidifiers, filters, and many more products!
If you’re experiencing any of these problems and are in need of emergency furnace repair in Edmonton and Calgary it’s important to call a professional immediately so that they can check your unit without causing further damage to your HVAC system. It’s also good practice to call in regular maintenance services so that you won’t have to worry about any problems in the future—especially in the middle of winter.
For furnace repair and maintenance in Edmonton and Calgary, you can contact Legacy Heating for guaranteed high-quality service. We have been helping clients for many years with furnace repairs in Edmonton and Calgary, and rest assured, we will do everything we can for you. Get a free quote today!
HVAC Brands We're Proud to Carry
Legacy only uses the most efficient and cost-effective HVAC products. We pride ourselves on putting quality and customers first! We will equip your new home with the best HVAC system and offer the most reliable residential heating service in Edmonton and Calgary.
Contact Us Today
We’ll help you find the right heating and air conditioning system for you and your budget.